The TriPollar™ by Pollogen is a 3rd generation radio frequency procedure for optimal painless anti-aging and body contouring. Apollo offers safe, effective and convenient wrinkle reduction, skin tightening, prevents wrinkle and aging, cellulite treatment and localized fat and circumference reduction. Apollo has been clinically proven to deliver immediate and long term results.
The local heating causes an immediate contraction of the collagen fibers and at the same time increases the metabolism of the fibroblasts thereby accelerating the production of new collagen and elastin fibers which strengthens the dermis and prevents further herniation of fat into the area thus reducing the effect of cellulite.
Preventive wrinkle and aging treatment
Reduction of double chin
Improved appearance of cellulite
Localized fat reduction
Stretch mark improvement
Q: What is Apollo TriPollar RF? A: Apollo TriPollar Radio Frequency (RF) technology is an innovative proprietary 3rd generation RF technology developed by Pollogen Ltd. Apollo TriPollar harnesses the inherent benefits of RF technology and overcomes the limitations of previous mono-polar and bi-polar technologies. It is simple to use and extremely efficient. Apollo TriPollar treatments deliver immediate visible facial contouring effects from the first treatment – and long-lasting aesthetic results without surgery or downtime.
Q: Is the Apollo TriPollar technology safe? Apollo TriPollar technology is FDA cleared and has been proved safe and effective in clinical studies. RF has been used in medicine for over 75 years. In aesthetic medicine, RF has been used for more than 10 years.
Q: What is Radiofrequency (RF) technology and how does it work? A: Radiofrequency, in the context of aesthetic applications, is a general method to heat deep skin layers by delivering High Frequency (HF) electrical current via electrodes into the body. Body cells do not interpret High Frequency electrical current as electricity but rather as an energy source. The skin layers act as resistors to the HF electrical current and depending on their resistance they heat up to varying degrees. The heat which is generated in the dermis and subcutaneous layers is responsible for the clinical outcome.
Q: What is the difference between TriPollar, mono-polar and bi-polar RF? A: Mono-polar, the first generation of RF technology, uses one electrode to deliver electrical energy and a return pad connected to the leg or back to close the electrical circuit. The electric current passes through a large part of the body so that there is no control over the depth of penetration and area affected. The next generation, Bi-polar technology, uses two electrodes on the treatment applicator, with the current flowing between the two electrodes. This confines the treatment area somewhat, but still does not achieve effective treatment focus. Since both Mono-polar and Bi-polar RF technologies are not focused, they usually require higher energy levels to achieve clinical results. The high energy heats the skin that is near the electrodes. This can cause pain and a high risk of burns and skin damage. In addition, these older technologies require cooling mechanisms to mitigate these risks, which result in less efficient heating of the skin layers. With TriPollar RF technology, controlled energy is delivered via three or more electrodes, centered between them, and limited only to the treatment area. This focused energy delivery results in improved treatment efficacy that provides immediate visible results from the 1st treatment. The treatment is painless and pleasant because of the relatively low power needed.
Q: Can we combine Apollo TriPollar treatments with other treatments?A: The decision to combine the Apollo TriPollar treatment with other modalities should be based on individual patient results. The secondary treatment should be performed only after complete healing has occurred. The general recommendations for combination treatments based on feedback gathered from practitioners are:
Invasive/ablative procedures such as: plastic surgery, liposuction, deep peeling, laser resurfacing: 1-3 months or until complete healing has occurred. Botox: 2 weeks. Natural fillers: 3-4 weeks. Mesotherapy: depends on formulation and skin healing rate. Superficial/ light peels, AHA and BHA: 2 weeks. Fractional laser: 1 month or until complete healing. Ultrasound, LED devices: 24 hours. Laser, IPL procedures: 1-2 week. Synthetic fillers, gold/plastic threads: not recommended to combine
Q: What facial conditions does the Apollo treat? A: The Apollo is cleared by the FDA for treatment of facial wrinkles and rhytides. Due to enhanced generation of new collagen and tightening of existing collagen the Apollo can treat sagging skin, loose jowls, jaw line contouring, sagging skin under-chin (“turkey neck”), wrinkles and fine lines, and a general toning and lifting of the face.
Q: What does a Apollo TriPollar treatment feel like? A: An Apollo TriPollar treatment feels like a warm massage. For skin tightening purposes t is pleasant and pain-free. Some patients even report falling asleep during treatments. For fat removal purposes temperatures get to a level which are described as a “hot stone massage” when the stones are first placed on the skin. Not painful, but definitely hot.
Q: What is the down time after an Apollo TriPollar treatment? A: There is no down time after an Apollo TriPollar treatment. One can resume regular activity immediately after the treatment.
Q: What does the patient need to do to prepare for an Apollo TriPollar treatment? A: There are no special requirements or preparations for an Apollo TriPollar treatment.
Q:How many Apollo TriPollar facial treatments are recommended? A: The standard protocol for facial treatments with the Apollo device calls for 6 treatments. We find a package of 8 has patients highly satisfied with their results. However, if needed, more treatments can be added according to the condition being treated. Touch-up treatments are recommended every 6 months to maintain and improve the treatment results (one treatment every 3 months is recommended for women over 45 due to accelerated collagen deterioration).
Q: How long is the Apollo TriPollar treatment? A: The duration of the Apollo facial treatment is about 30-45 minutes for a single area; up to two areas can be treated at the same time.
Q:How soon can I see results? A: The majority of patients are able to see visible results immediately after the 1st treatment. However, in order to achieve long-term results, you will need to undergo several Apollo TriPollar treatments with full results 90 days after your last treatment (appearance and condition of your skin will continue to get better over the three months after treatment ends).
Q: How long will the results last? A: The results should last 9-12 months, however, since the body continues to age and the ageing process cannot be stopped, it is recommended to undergo preventative treatments every six months in order to maintain the results.
Q: If I have metal implants in my knees, can I have an Apollo TriPollar facial treatment? A: Yes, you can undergo a facial treatment if the metal implants are in a different body area. In general, treatment should not be performed over metal implants. If you have teeth fillings, braces etc. you can also undergo treatment. If the area feels sensitive, dental cotton pads or slightly damped gauze can be inserted between the teeth and cheeks.
Q: Can a Apollo TriPollar treatment be performed every day? A: Clinical trials conducted by Pollogen found that optimal results are obtained when there is a one week interval between treatments. If the intervals need to be adjusted, the minimum time between treatments should be four days and the maximum time should be two weeks.
Q: Should one drink water after an Apollo TriPollar Treatment? A: It is a good idea to drink water after an Apollo TriPollar treatment to refresh and to improve lymphatic drainage.
Q: How soon after pregnancy can a TriPollar facial treatment be performed? A: A TriPollar treatment can be performed 1-3 months post pregnancy (as long as the woman is not breast feeding and depending on her general physical health.)
Q: Why is glycerin used during Apollo TriPollar treatments?A: Glycerin was found to be the most suitable treatment lubricant due to its high resistance to RF. It allows the RF to penetrate to the deep layers while protecting the epidermal layer from becoming overheated or harmed. Glycerin is also widely used in the cosmetics industry as a safe and beneficial component. Glycerin also helps the applicator glide comfortably over the skin.
Pricing for Apollo TriPollar:
Single treatments $300 (For prevention & maintenance)
Package of 8 Recommended for Correction; Package Discounts Available